ZyXEL Communications 202H - Manual (Page 30)

Prestige 202H User’s Guide
1-2 Getting to Know Your Prestige
Auto-negotiating 10/100 Mbps Ethernet LAN
The LAN interfaces automatically detect if they are on a 10 or a 100 Mbps Ethernet.
Auto-crossover 10/100 Mbps Ethernet LAN
The LAN interfaces automatically adjust to either a crossover or straight-through Ethernet cable.
Call Scheduling
Configure call time periods to restrict and allow access for users on remote nodes.
Network Address Translation (NAT)
NAT (Network Address Translation - NAT, RFC 1631) allows the translation of multiple IP addresses used
within one network to different IP addresses known within another network.
SNMP (Simple Network Management Protocol – Versions 1 and 2)
SNMP, a member of the TCP/IP protocol suite, allows you to exchange management information between
network devices. Your router supports SNMP agent functionality that allows a manager station to manage
and monitor the router through the network.
SNMP is only available if TCP/IP is configured on your router.
IP Alias
IP Alias allows you to partition a physical network into logical networks over the same Ethernet interface.
The Prestige supports three logical LAN interfaces via its single physical Ethernet LAN interface with the
Prestige itself as the gateway for each LAN network.
ISDN Data Link Connections
The router supports two types of ISDN Data Link Connections: point-to-multipoint and point-to-point.
ISDN Basic Rate Interface (BRI) Support
The router supports a single BRI. A BRI offers two 64 Kbps channels, which can be used independently for
two destinations or be bundled to speed up data transfer.
Incoming Call Support
In addition to making outgoing calls, you can configure the router to act as a remote access server for
telecommuting employees.