ZyXEL Communications 202H - Manual (Page 75)

Prestige 202H User’s Guide
Remote Node Configuration 8-3
Table 8-1 Menu 11.1 Remote Node Profile
FIELD DESCRIPTION EXAMPLE
Rem Node
Name This is a required field [?]. Enter a descriptive name for the remote node,
for example, Corp. This field can be up to eight characters. This name
must be unique from any other remote node name or remote dial-in user
name.
Active Press [SPACE BAR] and then [ENTER] to select Yes (activate remote
node) or No (deactivate remote node). Yes
If this parameter is set to Both, your Prestige can both place and receive
calls to/from this remote node. Outgoing
If set to Incoming, your Prestige will not place a call to this remote node.
If set to Outgoing, your Prestige will drop any incoming calls from this
remote node.
Call Direction
Several other fields in this menu depend on this parameter. For example,
in order to enable Callback, the Call Direction must be set to Both.
Incoming:
Rem Login
Enter the login name that this remote node will use when it calls your
Prestige.
The login name in this field combined with the Rem Password will be
used to authenticate this node.
Rem
Password
Enter the password used when this remote node calls your Prestige.
Rem CLID This field is applicable only if Call Direction is either set to Both or
Incoming. Otherwise, a N/A appears in the field.
This is the Calling Line ID (the telephone number of the calling party) of
this remote node.
If you enable the CLID Authen field in Menu 13 – Default Dial-In Setup,
your Prestige will check the CLID in the incoming call against the CLIDs
in the database. If no match is found and CLID Authen is set to Required,
the call will be dropped.