ZyXEL Communications 202H - Manual (Page 80)

Prestige 202H User’s Guide
8-8 Remote Node Configuration
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
BACP= Enable
Multiple Link Options:
BOD Calculation= Transmit or Receive
Base Trans Rate(Kbps)= 64
Max Trans Rate(Kbps)= 64
Target Utility(Kbps)= 32-48
Add Persist(sec)= 5
Subtract Persist(sec)= 5
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Figure 8-3 Menu 11.2 Remote Node PPP Options
Table 8-3 Menu 11.2 Remote Node PPP Options
FIELD DESCRIPTION EXAMPLE
Standard PPP Encapsulation Select CISCO PPP only when this remote node is a Cisco
machine; otherwise, select Standard PPP.
Compression Turn on/off Stac Compression. The default for this field is
No. No
BACP Your Prestige negotiates the Secondary Phone number for
a dial-up line from the peer when BACP (Bandwidth
Allocation Control Protocol) is enabled; otherwise it uses
the Secondary Phone number set in Menu 11.1. Enable (default)
Multiple Link Options:
BOD Calculation Select the direction of the traffic you wish to use in
determining when to add or subtract a link. Options for this
field are: Transmit or Receive, Transmit, Receive.
Transmit or
Receive
(default)
Base Trans Rate (Kbps) Select the base data transfer rate for this remote node in
Kbps. There are two choices for this field: 64 where only
one channel is used or, 128 where two channels are used
as soon as a packet triggers a call.
64
Max Trans Rate (Kbps) Enter the maximum data transfer rate allowed for this
remote node. This parameter is in kilobits per second.
64