ZyXEL Communications 202H User Manual
Page 77
Prestige 202H User’s Guide
Remote Node Configuration
8-5
Table 8-1 Menu 11.1 Remote Node Profile
FIELD DESCRIPTION
EXAMPLE
Telco
Options:
Transfer
Type
This field specifies the type of connection between the Prestige and this
remote node. When set to Leased, the Allocated Budget and Period do
not apply.
64k
Allocated
Budget (min)
This field sets a ceiling for outgoing call time for this remote node. The
default for this field is 0 for no budget control.
Default = 0
Period (hr) This field sets the time interval to reset the above outgoing call budget
control.
Schedules Apply up to 4 schedule sets, separated by commas to your remote node
here. Please see ahead for a full discussion on schedules.
Carrier
Access Code
In some European countries, you need to enter the access code number
of your preferred telecommunications service provider. Your telephone
company should supply you with this number.
Nailed-up
Connection
This field specifies if you want to make the connection to this remote
node a nailed-up connection. See the following section for more details.
No
Toll Period This is the basic unit of time for charging purposes, e.g., 25 cents every 3
minutes – 3 minutes is the Toll Period.
Session
Options:
Edit Filter
Sets
Press [SPACE BAR] and then [ENTER] to select Yes to open Menu 11.5
to edit the filter sets. See the Remote Node Filter section for more details.
Default = No
Idle Timeout
(sec)
This value specifies the number of idle seconds that elapses before the
remote node is automatically disconnected. Idle seconds is the period of
time when no data is transmitted from your Prestige. Administrative
packets such as RIP are not counted as data. The default is 300 seconds
(5 minutes). Idle timeout only applies when the Prestige initiates the call.
0 sec means the remote node will never be automatically disconnected.
Default =
300 secs
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [ESC] at any time to cancel.