ZyXEL Communications 202H - Manual (Page 59)

Prestige 202H User’s Guide
ISDN Setup 5-7
If you did not install RVS-Lite and want to use other programs such as AVM Fritz to
access the ISDN router, you must first install the CAPI driver - RVS-CE using the
English version installation wizard (in \DISKs\CEPE\DISK1\) and start the
SETUP.EXE.
5.3.4 Configuring NetCAPI
Press the [SACEBAR] to select Yes in Edit NetCAPI Setup field in Menu 2 and press [ENTER] to go to
Menu 2.2 - NetCAPI Setup.
Figure 5-6 Menu 2.2 NetCAPI Setup
The following table describes the fields in this screen.
Table 5-2 Configuring NetCAPI
FIELD DESCRIPTION
Active This field allows you to enable or disable NetCAPI. Press the [SPACEBAR] to select
Yes or No
Menu 2.2 - NetCAPI Setup
Active= Yes
Max Number of Registered Users= 1
Incoming Data Call Number Matching= NetCAPI
Access List:
Start IP End IP Operation
192.168.1.132 192.168.1.145
Both
192.168.14.1 192.168.14.32 Imcoming
192.168.20.7 192.168.20.12 Outgoing
192.168.30.1 192.168.30.3 Both
10.0.0.0 10.255.255.255
Incoming
_______________ _____________ _______
_______________ _____________ _______
_______________ _____________ _______
default Both
Press ENTER to Confirm or ESC to Cancel: