ZyXEL Communications Prestige 794M - Manual (Page 104)

Prestige 794M User’s Guide
Chapter 9 Static Route 104
C
H A P T E R
9
Static Route
This chapter shows you how to set advanced system settings.
9.1 Overview
Each remote node specifies only the network to which the gateway is directly connected, and
the Prestige has no knowledge of the networks beyond. For instance, the Prestige knows about
network N2 in the following figure through remote node router R1. However, the Prestige is
unable to route a packet to network N3 because it doesn't know that there is a route through the
same remote node router R1 (via gateway router R2). The static routes are for you to tell the
Prestige about the networks beyond the remote nodes.
Figure 75 Static Route: Network Example ]
9.2 Configuration
Click Configuration, Advanced and Static Route in the navigation panel to display the
screen as shown.
Figure 76 Advanced: Static Route
The following table describes the labels in this screen.