Figure 18 quick start, Table 12 quick start – ZyXEL Communications Prestige 794M User Manual
Page 36
Prestige 794M User’s Guide
Chapter 2 The Web Configurator
36
Click Quick Start in the navigation panel to display the screen as shown.
Figure 18 Quick Start
The following table describes the labels in this screen.
Table 12 Quick Start
LABEL
DESCRIPTION
Connection
Encapsulation
Select the connection type from the drop-down list.
Click Auto Scan to have the Prestige automatically detect and select the
connection type. Refer to
for more information.
VCI
Enter the VCI number.
VPI
Enter the VPI number.
NAT
Select Enable to allow more than one computer behind the Prestige to access the
Internet.
Select Disable to allow only one user to access the Internet or if computer(s)
behind the Prestige is provided with a public IP address(es).
Optional Settings
IP Address
Enter the IP address (in dotted decimal notation) If you are provided with a static
public IP address.
Otherwise, enter 0.0.0.0 if your ISP provides you with a dynamic IP address.
Subnet Mask
Enter the subnet mask (in dotted decimal notation) associated with the static IP
address above.
Default Gateway
Enter the IP address of the default gateway.
DNS
Primary/
Secondary DNS
If provided by your ISP, enter the IP address(es) of the DNS server(s).
PPP
Set the fields below if you select PPPoA or PPPoE in the Encapsulation field.
above.