ZyXEL Communications Prestige 794M - Manual (Page 113)

Prestige 794M User’s Guide
113 Chapter 12 Device Management
Figure 80 Advanced: Device Management
The following table describes the labels in this screen.
Table 60 Advanced: Device Management
LABEL DESCRIPTION
Device Host Name
Host Name Enter a name for identification purposes.
Embedded Web
Server
HTTP Port Specify the port number of the embedded web server on the Prestige for
accessing the web configurator. The default port number is 80.
Enter a number.
Note: Make sure the port number is not already used by
another service.
If you change the port number, you need to append the
port number to the WAN or LAN port IP address to
access the web configurator. For example, if you enter
“8010” as the web server port number, then you must
enter “http://www.192.168.1.1:8010” where 192.168.1.1
is the WAN or LAN port IP address.
Management IP
Address
A secure client is a “trusted” computer that is allowed to access the embedded
web server on the Prestige.
Enter the IP address of a computer that you want to allow access.
Enter 0.0.0.0 to allow a computer with any IP address to access the Prestige.