ZyXEL Communications Prestige 794M - Manual (Page 85)

Prestige 794M User’s Guide
85 Chapter 7 VPN
7.3.6 IPSec VPN Configuration
To configure an IPSec VPN connection, click Create in the main IPSec screen.
Figure 59 IPSec: Create
The following table describes the labels in this screen.
Table 44 VPN Rules (IKE): Add Policy
LABEL DESCRIPTION
Connection Name Enter a descriptive name for identification purposes.
Local Configure the fields to allow one or more than one computer on the LAN to use a
VPN connection.
Single Address Select Single Address to allow one VPN client with the specified IP address to
use the VPN connection.
Enter a single IP address in the IP Address field.
Subnet Select Subnet Address to allow more than one computer in the specified
subnet to use the VPN connection.
Enter the IP address and subnet mask in the IP Address and Netmask fields
respectively.
IP Range Select IP Range to allow more than one computer in the specified IP address
range to use the VPN connection.
Enter the starting and ending IP addresses in the IP Address and End IP fields
respectively.
Remote Configure the fields to allow one or more than one computer on the remote
network to use a VPN connection.
Secure Gateway
Address (or
Hostname)
Type the WAN IP address or hostname of the remote IPSec router with which
you're making the VPN connection.