ZyXEL Communications Prestige 794M - Manual (Page 31)

Prestige 794M User’s Guide
31 Chapter 2 The Web Configurator
2.7.1 PPTP Status
Use the PPTP Status screen to view PPTP VPN connection information. Click Status and
PPTP Status in the navigation panel to display the screen as shown next.
Figure 11 Status: PPTP Status
The following table describes the labels in this screen.
2.7.2 IPSec Status
Use the IPSec Status screen to view IPSec VPN connection information. Click Status and
IPSec Status in the navigation panel to display the screen as shown next.
Figure 12 Status: IPSec Status
Gateway This field displays the IP address of a gateway that this route uses.
Cost This field displays the cost (or hope count) for this route.
Table 5 Status: Routing Table (continued)
LABEL DESCRIPTION
Table 6 Status: PPTP Status
LABEL DESCRIPTION
Name This field displays the name of the VPN rule used for this connection.
Type This field displays the type of VPN connection (dial-in or dial-out).
Enable This field indicates whether the VPN rule is currently enabled.
Active This field indicates whether the VPN rule is activated.
Tunnel Connected This field indicates whether the VPN tunnel is up.
Call Connected If the Call for this VPN entry is currently connected.
Encryption This field displays the encryption type for this VPN connection.