ZyXEL Communications Prestige 794M - Manual (Page 45)

Prestige 794M User’s Guide
45 Chapter 3 LAN
Figure 26 LAN: DHCP Server: DHCP
The follow table describes the labels in this screen.
Table 18 LAN: DHCP Server: DHCP
LABEL DESCRIPTION
DHCP Server
Allow Bootp Select Enable to allow BootP (Bootstrap Protocol) clients. Otherwise, select
Disable.
Allow Unknown
Clients
Select Enable to assign network settings (such as IP address) to any client
computer.
Select Disable to assign network settings (such as IP address) to the client(s) you
specify in the Fixed Host screen.
Use Default
Range
Select this check box to use the default client IP address pool.
The default address pool has 20 IP addresses starting from 192.168.1.2 to
192.168.1.21.
Starting IP
Address
This field specifies the first of the contiguous addresses in the IP address pool.
Ending IP
Address
This field specifies the last of the contiguous addresses in the IP address pool.
Default Lease
Time
Specify the default time (in seconds) a client is allowed to use the assigned IP
address.
Maximum Lease
Time
Specify the maximum time (in seconds) a client is allowed to use the assigned IP
address.
Use Router as
DNS Server
Select this check box to use the Prestige as the default DNS server. The Prestige
performs the domain name lookup and forwards the mapping information to the
requesting client.
Primary/
Secondary DNS
Server
This field is applicable when the Use Router as DNS Server check box is not
selected.
Enter the IP address of the DNS server in dotted decimal notation.
Use Router as
Default Gateway
Select this check box to use the Prestige as a default gateway for the client
computer(s) on the LAN.
Apply Click Apply to save your changes back to the Prestige.