ZyXEL Communications Prestige 794M - Manual (Page 41)

Prestige 794M User’s Guide
41 Chapter 3 LAN
Figure 21 LAN: Ethernet Client Filter
The following table describes the labels in this screen.
3.4.1 Ethernet Client Filter Candidates
You can display a list of MAC address of the devices that are currently connected to the
Prestige. You can use the Active PC in LAN screen to add the selected MAC address(es) to the
Ethernet Client Filter screen.
In the Ethernet Client Filter screen, click Candidates to display the screen.
Figure 22 LAN: Ethernet Client Filter: Active PC in LAN
Table 14 LAN: Ethernet Client Filter
LABEL DESCRIPTION
Ethernet Client
Filter
Select Disable to deactivate this feature. This allows any computer to access the
network through the Prestige.
Select Allowed to set the Prestige to permit the specified computers to access the
network.
Select Blocked to set the Prestige to deny the specified computers from
accessing the network.
MAC Address List Specify the computer(s) which you want to allow or deny network access. Enter
the MAC address of a computer in hexadecimal notation.
Click Candidates to add one or more MAC addresses of the devices that are
currently connected to the Prestige.
Apply Click Apply to save the settings.