ZyXEL Communications Prestige 794M - Manual (Page 99)

Prestige 794M User’s Guide
99 Chapter 8 QoS (Quality of Service)
Figure 69 QoS: Outbound IP Throttling
The following table describes the labels in this screen.
Table 52 QoS: Outbound/Inbound IP Throttling
LABEL DESCRIPTION
Application Enter a descriptive name for identification purposes.
Time Schedule Specify when this rule is active. Select Always On to activate the rule all the
time. Otherwise, select a schedule (that you configure in the Time Schedule
screen).
Protocol Select a protocol type from the drop-down list box. Choices are any, tcp, udp,
icmp and gre.
Source Port Enter the source port number from which traffic travels.
Destination Port Enter the destination port number to which traffic travels.
Source IP Address
Range
You can set the Prestige to prioritize traffic from specified source IP
address(es).
Specify one or a range of source IP address(es). Leave the fields as 0.0.0.0 to
prioritize packets from any source IP address.
Destination IP
address Range
You can set the Prestige to prioritize traffic to specified destination IP
address(es).
Specify one or a range of destination IP address(es). Leave the fields as
0.0.0.0 to prioritize packets from any destination IP address.