ZyXEL Communications Prestige 794M - Manual (Page 94)

Prestige 794M User’s Guide
Chapter 7 VPN 94
Figure 65 Remote PPTP VPN Dial-In Configuration Example
The following table describes the configuration steps.
7.5.2 Example: Remote PPTP VPN Dial-out Connection
The following figure depicts a VPN network example where a computer on the LAN behind
the Prestige can establish a VPN connection to the public file server.
Figure 66 PPTP: Remote VPN Dial-out Access
Table 48 Remote PPTP VPN Dial-In Configuration Example
STEP FIELD SETTING DESCRIPTION
1 Connection Name Example This name is for identification purposes only.
2 Dial in Select this field to allow a remote VPN client to
establish a VPN connection to the Prestige.
Private IP Address
Assigned to Dialing
User
192.168.1.200 The Prestige assigns this IP address to the remote
VPN client after the VPN connection is established.
3 Username test Specify the user name and password the remote VPN
client must supply to establish a VPN connection.
Password test
4 Auth.Type Chap(Auto) In this network example, the default authentication and
encryption settings are used.
Data Encryption Auto
Key Length Auto
Mode stateful
Idle Time 0 A value of 0 means the connection is always on.
1
2
3
4