ZyXEL Communications Prestige 794M - Manual (Page 66)

Prestige 794M User’s Guide
Chapter 6 Firewall 66
6.3 General Settings
Enable the firewall in the General Settings screen. Click Configuration, Firewall and
General Settings in the navigation panel to display the screen as shown.
Figure 45 Firewall: General Settings
The following table describes the labels in this screen.
Table 29 Firewall: General Settings
LABEL DESCRIPTION
Security Select Enable to activate firewall on the Prestige.
Select Disable to deactivate firewall on the Prestige.
Policy The options are applicable when you select Enable in the Security field.
Select All blocked/User-defined to block all out-going (LAN to Internet) and
incoming packets (Internet to LAN) based on the firewall filters you configure. By
default, there is no custom filters.
Select High security level, Medium security level (default) or Low security
level to block packets based on the pre-defined firewall filters. Refer to Table 30
on page 67 for more information.
Block WAN
Request
Select Enable to set the Prestige not to respond to any incoming Ping requests.
Select Disable to deactivate this feature. THe Prestige will respond to all Ping
requests.
Apply Click Apply to save the settings.