ZyXEL Communications Prestige 794M - Manual (Page 28)

Prestige 794M User’s Guide
Chapter 2 The Web Configurator 28
• Click the RESTART button to reboot the Prestige.
• Click the LOGOUT button at any time to exit the web configurator.
2.5 System Status
Display the Status screen (see Figure 8 on page 27 ) to view general system information. The
following table describes the labels in this screen.
Table 3 Status
LABEL DESCRIPTION
Device Information
Model Name This field displays the model number of your Prestige.
Host Name This field displays the host name of the Prestige for identification purposes. Click
this label to display the Host Name screen.
System Up-Time This field displays the time (in the format of hh:mm:ss) since the Prestige was last
restarted.
Current TIme This field displays the system time. Click this label to display the Time Zone
screen.
Click Sync Now to synchronize the system time to the time server specified in the
Time Zone screen.
Hardware Version This is the hardware version associated with your Prestige.
Software Version This is the firmware version the Prestige is currently using.
MAC Address This is the MAC (Media Access Control) or Ethernet address unique to your
Prestige.
Home URL Click this link to go to the ZyXEL company web site.
LAN
IP Address This is the IP address (in dotted decimal notation) on the LAN. Click the label to
display the Ethernet screen.
Subnet Mask This is the subnet mask (in dotted decimal notation) on the LAN.
DHCP Server This field displays the LAN DNCP server status. Click the label to display the
DHCP Server screen.
WAN
ipwan This field displays the type of WAN interface. Click this label to display the WAN
Connection screen.
VPI/VCI This field displays the VCI (Virtual Circuit Identifier) and VPI (Virtual Path Identifier)
numbers.
Primary DNS This field displays the primary DNS server IP address (in dotted decimal notation).
Click this label to display the DNS screen.
Port Status
Port This field displays interface name (Ethernet or SHDSL). Click a label to display the
Port Setting or the SHDSL screen.
Connected This field displays a check to indicate that a port is up. Otherwise a cross is
displayed.
Statistics