ZyXEL Communications Prestige 643 - Manual (Page 126)

Prestige 643 ADSL Router
9-2 SNMP Configuration
The following table describes the SNMP configuration parameters.
Table 9-1 SNMP Configuration Menu Fields
FIELD DESCRIPTION EXAMPLE
Get
Community Enter the get community, which is the password for the
incoming Get- and GetNext- requests from the management
station. Public
(default)
Set
Community Enter the set community, which is the password for incoming
Set- requests from the management station. Public
(default)
Trusted Host If you enter a trusted host, your Prestige will only respond to
SNMP messages from this address. If you leave the field
blank (default), your Prestige will respond to all SNMP
messages it receives, regardless of source. 0.0.0.0
(default)
Trap:
Community Enter the trap community, which is the password sent with
each trap to the SNMP manager. Public
(default)
Trap:
Destination Enter the IP address of the station to send your SNMP traps
to. 0.0.0.0
(default)
Once you have completed filling in Menu 22 - SNMP Configuration, press [ ENTER ] at the
message “Press ENTER to Confirm…” to save your configuration, or press [ ESC ] to cancel.