ZyXEL Communications Prestige 643 - Manual (Page 140)

Prestige 643 ADSL Router
10-14 System Maintenance
Figure 10-13 Restore Configuration
Step 2. Press “Y” to indicate that you want to continue.
The following procedure is for the HyperTerminal program. The procedure for other serial communications
programs should be similar. Run the HyperTerminal program.
Step 3. Click “Transfer”, then “Send File” to display the following screen.
Figure 10-14 HyperTerminal Screen
Step 4. Enter where the rom configuration file is on your computer and make sure you choose the
XMODEM protocol. Then press “Send”.
Step 5. After a successful restoration you will see the following screen. Press any key to return to reboot
the system.
Figure 10-15 Successful Restoration
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Save to ROM
Hit any key to start system reboot.
Choose the
Xmodem
Protocol.
Enter where the rom
configuration file is on your
computer.
Finally,
click Send.