ZyXEL Communications Prestige 643 - Manual (Page 50)

Prestige 643 ADSL Router
3-8 Internet Access
3.7 Route IP Setup
The first step is to enable the IP routing in Menu 1 - General Setup.
To edit Menu 1, type in 1 in the main menu and press [ENTER]. Set the Route IP field to Yes by pressing
[SPACE BAR].
Figure 3-6 Menu 1 - General Setup
3.8 TCP/IP Ethernet Setup and DHCP
Use Menu 3.2 to configure your Prestige for TCP/IP.
To edit Menu 3.2, enter 3 from the main menu to display Menu 3 - Ethernet Setup. When Menu 3 appears,
press 2 and press [ENTER] to display Menu 3.2 - TCP/IP and DHCP Ethernet Setup, as shown next
:
Menu 1 - General Setup
System Name= P643
Location= location
Contact Person's Name=
Route IP= Yes
Route IPX= No
Bridge= No
Press ENTER to Confirm or ESC to Cancel: