Remote node tcp/ip configuration, Chapter 5 remote node tcp/ip configuration, 1 lan-to-lan application – ZyXEL Communications Prestige 643 User Manual
Page 73
Advertising

Prestige 643 ADSL Router
Remote Node TCP/IP Configuration
5-1
Chapter 5
Remote Node TCP/IP Configuration
This chapter shows you how to configure the TCP/IP parameters of a remote node.
5.1 LAN-to-LAN
Application
A typical LAN-to-LAN application uses your Prestige to connect a branch office to the headquarters, as
depicted in the following diagram.
Figure 5-1 TCP/IP LAN-to-LAN Application
For the branch office, you need to configure a remote node in order to dial out to headquarters.
Additionally, you may also need to define static routes if some services reside beyond the immediate
remote LAN.
Advertising