ZyXEL Communications Prestige 643 - Manual (Page 40)

Prestige 643 ADSL Router
2-10 Hardware Installation & Setup
2.8 Changing the System Password
The first thing your should do before anything else is to change the default system password by following
the steps below.
Step 1. Enter 23 in the main menu to display Menu 23 - System Password as shown below.
When this appears, type in your existing system password, i.e., 1234, and press [ENTER].
Figure 2-9 Menu 23 - System Password
Step 2. Type in your new system password (up to 30 characters), and press [ENTER].
Step 3. Re-type your new system password for confirmation and press [ENTER].
Note that as you type a password, the screen displays a (*) for each character you type.
2.9 General Setup
Menu 1 - General Setup contains administrative and system-related information.
To enter Menu 1 and fill in the required information, follow these steps:
Step 1. Enter 1 in Main Menu to display Menu 1 – General Setup.
Step 2. The Menu 1 - General Setup screen appears, as shown below. Fill in the required fields
marked [?] and turn on the individual protocols for your applications, as explained in the
following table.
Menu 23 – System Password
Old Password= ****
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL: