ZyXEL Communications Prestige 643 - Manual (Page 139)

Prestige 643 ADSL Router
System Maintenance 10-13
Step 1. Click “Transfer”, then “Receive File” to display the following screen.
Figure 10-11 HyperTerminal Screen
Step 2. Enter a path and name for the rom configuration file on your computer and make sure you
choose the XMODEM protocol. Then press “Receive”.
Step 3. After a successful backup you will see the following screen. Press any key to return to the SMT
menu.
Figure 10-12 Successful Backup
10.7 Restore Configuration
Enter 6 from Menu 24 – System Maintenance to restore the configuration from your workstation to the
Prestige. Again, you must use the console port and XMODEM protocol to restore the configuration.
Keep in mind that the configuration is stored in the flash ROM in the Prestige, so even if power failure
should occur, your configuration is safe.
Step 1. Go to Menu 24.6 (shown next).
** Backup Configuration completed. OK.
### Hit k t ti ###
Choose the Xmodem
Protocol.
Enter where the rom
configuration file is on your
computer.
Finally,
click Send.