ZyXEL Communications Prestige 643 - Manual (Page 41)

Prestige 643 ADSL Router
Hardware Installation & Setup 2-11
Figure 2-10 Menu 1 - General Setup
Table 2-4 General Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
System Name Choose a descriptive name for identification purposes. This name can
be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes “-” and underscores "_" are accepted. P643
Location (optional) Enter the geographic location (up to 31 characters) of your Prestige. MyHouse
Contact Person's
Name (optional) Enter the name (up to 30 characters) of the person in charge of this
Prestige. JohnDoe
Route IP Set this field to Yes to enable or No to disable IP routing. You must
enable IP routing for Internet access. Yes
Route IPX Set this field Yes to enable or No to disable IPX routing. No
Bridge Turn on/off bridging for protocols not supported (e.g., SNA) or not turned
on in the previous Route fields. Select Yes to turn bridging on; select
No to turn bridging off. No
2.10 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the main
menu, enter 3 to open Menu 3.
Menu 1 - General Setup
System Name= ?
Location=
Contact Person's Name=
Route IP= Yes
Route IPX= No
Bridge= No
Press ENTER to Confirm or ESC to Cancel: