ZyXEL Communications Prestige 643 - Manual (Page 154)

Prestige 643 ADSL Router
12-2 IP Policy Routing
The actions that can be taken include routing the packet to a different gateway (and hence the outgoing
interface) and the TOS and precedence fields in the IP header.
IPPR follows the existing packet filtering facility of ZyNOS in style and in implementation. The policies
are divided into sets, where related policies are grouped together. A user defines the policies before
applying them to an interface or a remote node, in the same fashion as the filters. There are 12 policy sets
with 6 policies in each set.
12.1.3 IP Policy Routing Setup
Menu 25 shows all the policies defined
Figure 12-1 IP Routing Policy Setup
To setup a routing policy, follow the procedures below:
Step 1. Enter 25 in the Main Menu to open Menu 25 – IP Policy Routing Setup.
Step 2. Enter the index of the policy set and a name that you wish to configure to open Menu 25.1 - IP
Policy Routing Summary.
Menu 25.1 shows the summary of a policy set, including the criteria and the action of a single policy, and
whether a policy is active or not. Each policy contains two lines. The former part is the criteria of the
Menu 25 - IP Routing Policy Setup
Policy Policy
Set # Name Set # Name
------ ----------------- ------ -----------------
1 test 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Policy Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel: