ZyXEL Communications Prestige 643 - Manual (Page 88)

Prestige 643 ADSL Router
6-6 IPX Configuration
Figure 6-4 LAN-to-LAN Application With Novell IPX
6.4.1 IPX Remote Node Setup
Follow the procedure in Remote Node TCP/IP Configuration to configure the protocol-independent
parameters in Menu 11.1 – Remote Node Profile. For the IPX-related parameters in Menu 11.3 – Remote
Node Network Layer Options, follow the instructions below.
To edit Menu 11.3 – Remote Node Network Layer Options shown next, follow these steps:
Step 1. In Menu 11.1, make sure IPX is among the protocols in the Route field. (The Route field should
display Route= IPX, or IP + IPX.)