Xantrex Technology XPD 60-9 - Manual (Page 18)

Section 1. Features and Specifications
Rear Panel Connectors
16 Operating Manual for XPD Series Power Supply
Table 1.2 Rear Panel J210 Connector Pins and Functions
Pin Reference Name Function
J210-1 TTL S/D
RTN Shutdown Signal Return
(
−)
Return for shutdown signal 1 .
J210-2 TTL S/D Shutdown Input ( +) Input for shutdown signal. 1
J210-3 N/C No connection None.
J210-4 N/C No connection None.
J210-5 IPGM Output Current Limit
Programming Input Input for current limit programming
signals from an analog device.
J210-6 VRMT
SELECT Remote Output Voltage
Programming Select Selects remote output voltage
programming when to jumpered to
pin 8.
2
J210-7 IRMT
SELECT Remote Output Current
Limit Programming
Select Selects remote output current limit
programming when jumpered to
pin 8.
2
J210-8 AGND Auxiliary Ground Auxiliary ground.
J210-9 N/C No connection None.
J210-10 N/C No connection None.
J210-11 N/C No connection None.
J210-12 IMON Output current monitor Output for output current monitor
signal.
J210-13 PGM/MON
RTN
Program/Monitor Return Return for voltage and current
program and monitor signals.
J210-14 VPGM Output Voltage
Programming Input Input for voltage programming
signals from an analog device.
J210-15 VMON Output Voltage Monitor Output for output voltage monitor
signal.
1. The TTL shutdown circuit is isolated to 500 V from the power supply output and chassis.
2. Jumpering pins J210-6, J210-7, and J210-8 will select both remote output voltage
programming and remote output current limit programming.