Xantrex Technology XPD 60-9 - Manual (Page 20)

Section 1. Features and Specifications
Electrical Specifications
18 Operating Manual for XPD Series Power Supply
Electrical Specifications
These specifications are warranted over a temperature range of 0 °C to 50 °C
with local sense. Above 50 °C, derate output linearly to zero at 70 °C. Nominal
line voltages are 100/120/200/230/240 Vac. Specifications and characteristics
refer to a single output model unless otherwise stated, and specifications apply
to either front or rear outputs unless noted.
Table 1.3 Electrical Specifications for 7.5 V to 120 V Models
Models 7.5-67 18-30 33-16 60-9 120-4.5
Output Ratings:
Output Voltage
Output Current
Output Power 0-7.5 V
0-67 A
1
502.5 W
0-18 V
0-30 A
540 W 0-33 V
0-16 A
528 W 0-60 V
0-9 A
540 W 0-120 V
0-4.5 A
540 W
Line regulation: 2
Voltage (0.01% of Vmax + 2 mV)
Current (0.01% of Imax + 1 mA) 2.8 mV
7.7 mV 3.8 mV
4 mV 5.3 mV
2.6 mV 8 mV
1.9 mV 14 mV
1.5 mV
Load Regulation: 3
Voltage (0.01% of Vmax + 2 mV)
Current (0.01% of Imax + 5 mA) 2.8 mV
11.7 mA 3.8 mV
8 mA 5.3 mV
6.6 mA 8 mV
5.9 mA 14 mV
5.5 mA
Meter Accuracy
Voltage (1% of Vmax + 1 count)
Current (1% of Imax + 1 count) 0.2 V
0.8 A 0.3 V
0.4 A 0.5 V
0.3 A 0.7 V
0.2 A 2.2 V
0.2 A
Output Noise (0-20 MHz):
Voltage (p-p) 50 mV 50 mV 75 mV 125 mV 180 mV
Output Ripple (0-100 kHz) (rms):
Voltage
Current
4
5 mV
250 mA 5 mV
250 mA 7.5 mV
150 mA 10 mV
150 mA 20 mV
75 mA
Drift (60 minutes): 5
Voltage (0.15% of Vmax)
Current (0.3% of Imax) 11.3 mV
201 mA 27 mV
90 mA 49.5 mV
48 mA 90 mV
27 mA 180 mV
13.5 mA
Drift (8 hours): 6
Voltage (0.03% of Vmax)
Current (0.05% of Imax) 2.3 mV
34 mA 5.4 mV
15 mA 9.9 mV
8 mA 18 mV
4.5 mA 36 mV
2.3 mA
Temperature Coefficient: 7
Voltage (0.015% of Vmax/º C
Current (0.02% of Imax/º C 1.2 mV
13.4 mA 2.7 mV
6 mA 5 mV
3.2 mA 9 mV
1.8 mA 18 mV
0.9 mA
OVP Adjustment Range:
Minimum (5% of Vmax)
Maximum (110% of Vmax) 0.4 V
8.3 V 0.9 V
19.8 V 1.7 V
36.3 V 3 V
66 V 6 V
132 V
Efficiency 8 81% 83% 85% 85% 84%