Section 2. installation, Introduction, Basic setup procedure – Xantrex Technology XPD 60-9 User Manual

Page 25: Section 2, Installation, Introduction basic setup procedure

Advertising
background image

Release A

23

Section 2. Installation

Introduction

This section provides recommendations and procedures for inspecting, installing,
and testing the power supply.

Basic Setup Procedure

See

Table 2.1

for a summary of the basic setup procedure and a view of the

subsections in this section. Use this procedure as a quick reference if you are
unfamiliar with the installation requirements for the power supply. Each step in the
procedure refers to subsequent sections which contain more details. Follow each step
in the sequence given.

Table 2.1 Basic Setup Procedure

Step

#

Description Action

Reference

1

Inspection

Perform an initial physical
inspection of the power
supply.

“Inspection, Cleaning, and

Packaging” on page 24

2

Installation

Install the supply (bench or
rack mount). Ensure
adequate ventilation.

“Location, Mounting, and

Ventilation” on page 27

3

Input Power

Connect AC input power.

“AC Input Power Connection”

on page 28

4

Test

Perform functional tests for
voltage mode operation,
current mode operation,
and front panel controls.

“Functional Tests” on page 29

5

Load

Connect the load.

“Load Connection” on page 30

6

Sensing

Connect sensing lines.

“Remote Sensing” on page 33

Advertising
This manual is related to the following products: