Protector removal – Z Microsystems GLIDER 20 User Manual

Page 14

Advertising
background image

Doc# 27-0006UM Issued 11/00 Rev 1.0

Protector Removal

14

The display protector is intended to protect the surface of the screen from

damage while in transit or while stowed. The display protector is not intended

to be used while the display is in operation.
To remove the display protector, do the following:

Rotate the display to the

horizontal position, with

the controls on the

bottom. Move the

display protector release

button (located above

the display) up.

While holding up the

display protector button,

slide the protector to the

right.

Slide the protector off

the edge of the display.
To reinstall the display

protector during long

storage or shipping,

just reverse this process.

Advertising