Z Microsystems GLIDER 20 - Manual (Page 16)

Doc# 27-0006UM Issued 11/00 Rev 1.0
Monitor Adjustments
INITIAL SETUP AND ADJUSTMENTS
The Glider features pushbutton
controls on the lower front of the
display screen to adjust the bright-
ness of the display, to change the
image positioning on the screen, and
to refine the screen image.
To complete the setup of the Glider,
use the following controls to fine tune
the image on the screen:
RESET
Restores factory settings
SELECT, H Pos,
Adjusts image position horizontally
SELECT, V Pos,
Adjusts image position vertically
SELECT, Clock,
Adjustment of signal sampling
point (left/right)
SELECT, H Wd,
Adjusts hortizontal size of image
SELECT, Brt,
Adjusts blacklight brightness
1 6