Z Microsystems GLIDER 20 - Manual (Page 4)

Doc# 27-0006UM Issued 11/00 Rev 1.0
The User Manual comes in two
formats: printed hardcopy or CD-
ROM. This Manual is also available
on the Z Microsystems website
(www.zmicro.com).
We recommend you read this manual
as follows:
Carefully follow the instructions in the
Installation chapter for hookup and
initial control settings. Refer to the
Operation chapter for a complete
description of all the user controls,
and the Maintenance chapter for care
and correcting any unforeseen
problems with the system. The
Appendix is provided for quickly
finding technical information about
the Glider.
SYSTEM REQUIREMENTS
The Glider works with any computer
system that provides industry stan-
dard screen formats from 640 x 480
to 1280 x 1024, with up to 75 Hz
vertical sync. See the Specifications
chapter of this Manual for a complete
listing of all resolutions supported.
The Glider requires a computer with a
suitable onboard subsystem for Video
Adapter Card that can support XGA
1024 x 768, SVGA 800 x 600, or
VGA 640 x 480 at 60 Hz.
The Glider shipping box contains the
following:
• The Glider Unit
• Video Signal Cable
• AC/DC Power Supply with at-
tached DC cable
• AC Power Cable
• User Manual
• Display Mount Unit
• Screen Protector
Remember to save your original
shipping container and packing
material to transport or ship the
Glider.
USER MANUAL SHIPMENT CONTENTS
4
Starting Point
Congratulations on selecting a
rugged field-ready Glider -- the most
advanced flat panel display avail-
able.