Z Microsystems GLIDER 20 - Manual (Page 19)

Doc# 27-0006UM Issued 11/00 Rev 1.0
19
The Glider can store screen settings
for multiple resolutions, which is
especially useful when it is used with
a graphics card that supports a range
of resolutions. The resolutions
supported by the Glider include:
• 1280 x 1024, SXVGA
• 1024 x 768, XGA
• 832 x 624, Mac
• 800 x 600, SVGA
• 640 x 480, VGA
• 720 x 400, VGA Tet
• 640 x 400, PC9801
TIPS AND TECHNIQUES
Graphics cards create a wide variety
of screen resolutions. The Glider
needs to be “educated” to interact
properly with your system’s graphics
card. Once the Glider has been
educated, the settings can be saved
and the Glider will not need to be
adjusted again, unless the graphics
cards are changed.
This section provides a thorough
tutorial on adjusting the settings for
the Glider.
Unlike CRT’s, flat panel displays do
not require a high refresh rate for
better display quality. In some cases,
a high refresh rate may have a
negative effect on display quality. If
all display artifacts are not removed
by the following procedure, try a
lower vertical refresh rate setting on
the computer system’s graphics card.