Z Microsystems GLIDER 20 - Manual (Page 28)

Doc# 27-0006UM Issued 11/00 Rev 1.0
2 8
Troubleshooting
NO IMAGE ON DISPLAY • Flip the power switch to on. The
circle should be down.
• Connect the power cable to a 110
vac outlet, which is turned on.
• Connect the video cable to the
computer. Be sure the computer is
on and operating.
• Make sure the power cable to the
back of the Glider is plugged in all
the way.
• Make sure the video cable to the
back of the Glider is plugged in all
the way.
• Make sure the power cable from
the Glider to the back of the
display head is plugged in all the
way.
• Make sure the video cable from the
Glider to the back of the display
head is plugged in all the way.