Z Microsystems GLIDER 20 - Manual (Page 22)

Doc# 27-0006UM Issued 11/00 Rev 1.0
Monitor Adjustments
22
Step 4: Adjust Horizontal
Position
Press the “SELECT” button until the “H
Pos” indicator is illuminated, then use
the and buttons to adjust
the horizontal position of the screen
left or right to center the screen
image.
Helpfut Hint:
When the screen is properly adjusted,
the left and right sides of the screen
will line up precisely with the left and
right sides of the panel. A single
push of the button should cause
a very narrow band (one or two pixels
wide) to appear on the left side of the
screen. Similarly, a single push of
the button should cause a very
narrow band (one or two pixels wide)
to appear on the right side of the
screen.
Step 5: Adjust Clock
Once the appropriate adjustments
have been made, press the “SELECT”
button until the “Clock” indicator is
illuminated, then use the
and buttons to obtain a
crisp screen.