Z Microsystems GLIDER 20 - Manual (Page 24)

Doc# 27-0006UM Issued 11/00 Rev 1.0
24
Display Head Removal
To remove the Glider display head, follow these steps:
On the back of the
display, press the
mounting arm button to
release the display head
locking bar.
Rotate the display to the
horizontal position. On
the back of the display,
disconnect the power
cable.
Disconnect the video
cable next to the power
cable.
Swing the display
locking bar out.
Use two hands to lift the
display up out of the
rack mount. Be careful
that the power and
video cables do not
catch on anything.
The display is now
removed from the head
mount.
WARNING: Be sure all electrical
power is turned off to the
Glider before proceeding.