Warning – RIDGID NaviTrack II User Manual
Page 25
NaviTrack® II
24
Maintenance and Cleaning
WARNING
1. Keep the NaviTrack® II clean with a damp cloth and
some mild detergent. Do not immerse in water.
2. When cleaning, do not use scraping tools or abrasives as
they may permanently scratch the display. NEVER USE
SOLVENTS to clean any part of the system. Substances
like acetone and other harsh chemicals can cause
cracking of the case.
Locating Faulty Components
For troubleshooting suggestions, please refer to the
troubleshooting guide on page 26. If necessary, contact your
distributor or your Ridge Tool Service Station.
Service and Repair
WARNING
Instrument should be taken to a RIDGID Independent
Authorized Service Center or returned to the factory. All repairs
made by Ridge service facilities are warranted against defects
in material and workmanship.