Acroprint Time Q - Manual (Page 18)

18
If your Time Q just came out of the factory box, or if you have
reinitialized and set the time and date, your Time Q will be set as follows:
The pay period length will be one week, beginning on Monday, and the
totals will be derived by adding together the actual elapsed time between
in and out punches. Anyone who stays on the clock for over 12 hours will
be automatically punched out because they have exceed the MAX TIME
ON CLOCK setting of 12 hours. If your pay period length is two weeks,
semimonthly or monthly, change the setting. If your pay period starts on a
day other than Monday, enter the NEXT pay period start date. An
example of the CLOCK RULES report settings follows.
1
SYSTEM INFORMATION: 2
LAST CHANGE: 2/13/97 12:11 PM :
2
SOFTWARE REVISION: TSW 0010 - VERSION 3.00 4
P
M
.................. END CLOCK RULES.............................................
CLOCK RULES 2/15/01 12:24 PM PAGE 1 C
============================================================================ L
O
CLOCK RULES: C
K
MAX TIME ON CLOCK 12:00 HOURS
PAY INTERVAL-ROUND 01 MINUTES R
PAY PERIOD WEEKLY U
NEXT PAY PERIOD START DATE 2/19/01 L
DAY CHANGE TIME 12:00 AM E
FIRST DAILY OVERTIME AFTER 24:00 HOURS S
FIRST WEEKLY OVERTIME AFTER 40:00 HOURS
SECOND DAILY OVERTIME AFTER 24:00 HOURS
SECOND WEEKLY OVERTIME AFTER 168:00 HOURS
7TH DAY OVERTIME DISABLED
DST START DATE 4/01/01
DST END DATE 10/28/01 2
TIME Q PRINTER PARALLEL /
COM PORT BAUD RATE 9600 1
5
SUPERVISOR BADGES: /
NO SUPERVISOR BADGES ASSIGNED 0
1
SHIFT RULES:
SHIFT 1 SHIFT 2 SHIFT 3 1
---------------- ---------------- ---------------- 2
SHIFT RULES DISABLED DISABLED DISABLED :
START TIME - - - 2
ROUND - - - 4
GRACE - - -
DOCK - - - P
STOP TIME - - - M
ROUND - - -
GRACE - - -
DOCK - - -
LUNCH RULES DISABLED DISABLED DISABLED
START TIME - - -
STOP TIME - - -
DURATION - - -
AUTO AFTER - - -
-------------------------------------------------------------------------
CLOCK RULES 2/15/01 12:24 PM PAGE 2 C
============================================================================ L
O
SHIFT RULES:(CONT.) C
K
SHIFT 4 SHIFT 5 SHIFT 6
---------------- ---------------- ---------------- R
SHIFT RULES DISABLED DISABLED DISABLED U
LUNCH RULES DISABLED DISABLED DISABLED L
Factory Settings
5. Factory Settings