Acroprint Time Q - Manual (Page 7)

7
Wall Mounting of Time Q:
The Time Q has a
reversible bracket on the back of the unit.
The unit is supplied with the bracket in a
tilt position for sitting on a desk. With the
access door removed, you are able to
remove the bracket. Reverse the bracket
for wall mounting. Secure the bracket to
the wall with the four screws. Note that
the bracket has molded wire routing slots
and a center hub for securing wires using
nylon ties. After the bracket is secured to
the wall, hang the Time Q unit on the
bracket.
Access Door
Reversible Bracket
screw
Setup
Removing the Access Door:
Unscrew the screw located on the
lower front panel of the unit to
remove the access door.
2.3 Initial Setup