Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 20)

Push the [SETTING START/END] button before you start setting. At that moment,
" " is indicated on a display and you go into setting mode.
Example Change the time from 10:08 to 10:09.
Setting the Time
1
Push the [DATE/TIME] button for 2
seconds.
3
In case of the example, push the
[SET] button because the hour is
not to be changed. Now the hour of
10 o'clock has been set. At that
moment, the flashing of the display
will change from "Hour" to
"Minute".
4
Push the [+] or [-] button to change
"minute". In case of the example,
push [+] button to change the
minute from 08 to 09.
5
Push the [SET] button to finish the
setting. At that moment, the display
will change from flashing to steady,
and the setting is now completed.
6
Push the [SETTING START/END]
button to get out of setting mode. Or
press the [DATE/TIME] function
button to set the date.
Make sure "date" and "time" are
indicated on the display and the
colon is flashing. Then replace the
cover and lock.
2
Once a number on the display starts
flashing, position the " " mark
under the "TIME" mark by pressing
the [DATE/TIME] button.
A flashing number can be changed.
20
14
SET DATE/TIME
TIME
SET DATE/TIME
TIME
SET DATE/TIME
TIME
SET DATE/TIME
AM
AM
AM
AM
AM
TIME
Minute
Second Hour
Date
Colon