Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 38)

38
32
Ribbon Color Change
If you have selected the "Time Zone" calculation rule, Program numbers 2 and 3 allow for
programming employee punches, outside the normal work schedule, to print in "RED" to
flag early out or late in punches. The example below punches after 8:01 AM and before 5:00
PM will print in RED.
Program 2 lets you select the time that the clock will print in RED. You must select the
minute before the program time. Example: To have the clock print in RED at 8:01 AM you
must set 8:00 AM.
Program 3 lets you select the time the clock will print in BLACK. You must select the
minute at the program time. Example: To have the clock print in BLACK at 5:00 PM you
must set 5:00 PM.
Set the " 02 Start time for irregular printing (black red)".
7
Push the [SET] button again. Then,
the left-side number starts flashing.
A flashing number can be changed.
8
Push the [+] or [-] button to set the
left-side number at "02" and push
the [SET] button. At that moment,
flashing of the display will change
to "Hour". In case of the example,
push the [+] or [-] button to set at "8
(a.m.)" and push the [SET] button.
At that moment, flashing of the
display will change from "Hour" to
"Minute".
9
In this case, push the [+] or [-]
button to set at "30". And then, push
the [SET] button. At that moment,
the display will change from
flashing to steady.
SET FUNCTION
SCHEDULE
SET
AM
FUNCTION
SCHEDULE
Hour
SET
AM
FUNCTION
SCHEDULE
SET
AM
FUNCTION
SCHEDULE
Minute
Program No.