Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 61)

The code "0000" must be entered to cancel the password.
Push the [SETTING START/END] button before you start setting. At that moment,
" " is indicated on a display and you go into setting mode.
Example The curent password is "1234" and cancel it.
Canceling the Password
1
Push the [FUNCTION] button for
two seconds. Then, "9999" will be
indicated on the display and the first
two digits flash.
A flashing number can be changed.
In case of the example, push the [+]
or [-] button to set at "12" and then,
push the [SET] button. At that
moment, flashing of the display will
change to the last two digits.
3
Position the " " mark over the
"PASSWORD" mark by pressing
the [FUNCTION] button. At that
moment, the first two digits "12"
flash.
A flashing number can be changed.
4
Push the [+] or [-] button to set at
"00" and then, push the [SET]
button. At that moment, the flashing
of the display will change to the last
two digits "34".
2
In case of the example, push the [+]
or [-] button to set at "34" and then,
push the [SET] button. At that
moment, the " " mark is located
under "PAY PERIOD".
61
SET FUNCTION
SET FUNCTION
SET FUNCTION
SET FUNCTION
PASSWORD
PASSWORD
SET FUNCTION
55