Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 69)

Card Resetting
When you want to reset the card manually before reaching the "Pay Period" day, you can go
into the "Card Resetting" mode.
Example The number of the card you want to reset is "003".
Push the [SETTING START/END] button before you start setting. At that moment,
" " is indicated on a display and you go into setting mode.
69
1
Push the [CARD RESET] button
for 2 seconds. Then, the number of
cards that you are using will be
shown on the display.
2
Select the desired card number by
pushing the [+] or [-] button. In
case of the example, push [+] button
to set at "03" and then, push the
[SET] button. At that moment, the
display will change from flashing to
steady, and push the [SET] button
once more.
3
Now the setting is completed.
Make sure "date" and "time" are
indicated on the display and the
colon is flashing. Then replace the
cover and lock.
The number
of cards
SET
SET
SET
SET
1
Refer to the Step 1 in "Card Re-
setting".
2
Push the [+] or [-] button to show
"ALL" and then push the [SET]
button. At that moment, the display
will change from flashing to steady,
and push the [SET] button once
again.
3
Now the setting is completed.
Make sure "date" and "time" are
indicated on the display and the
colon is flashing. Then replace the
cover and lock.
All Cards Resetting
When you want to reset all cards manually......
63
The number
of cards
CARD
RESET
CARD
RESET