Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 28)

Enabling these functions allows employees to move time totals on card or transfer to another
card. (Not recommended.) See Additional Features sections for how these features are used.
Push the [SETTING START/END] button before you start setting. At that moment,
" " is indicated on a display and you go into setting mode.
Example Make both "Override" and "Card Transfer" functions enabled.
Enabling Override and Transfer Functions
1
Push the [FUNCTION] button for 2
seconds.
3
In case of the example, push the [+]
or [-] button to set the left-side
number at "2" to make "Override"
function enabled and then push the
[SET] button. At that moment,
flashing of the display will change
to the right-side number.
5
Push the [SETTING START/END]
button to get out of setting mode.
Make sure "date" and "time" are
indicated on the display and the
colon is flashing. Then replace the
cover and lock.
4
In case of the example, push the [+]
or [-] button to set the right-side
number at "2" to make "Card
Transfer" function enabled and then
push the [SET] button. At that
moment, the display will change
from flashing to steady, and the
setting is now completed.
2
Once a number on the display starts
flashing, position the " " mark
under the "BUTTON FUNC." mark
by pressing [FUNCTION] button.
A flashing number can be changed.
28
22
SET
AM
Date
Colon
BUTTON
FUNC.
FUNCTION
SET
BUTTON
FUNC.
FUNCTION
[OVERRIDE]
1 Disabled
2 Enabled
[TRANSFER]
1 Disabled
2 Enabled
SET
BUTTON
FUNC.
FUNCTION