Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 53)

Confirming the Weekly Program
Refer to the Step 1 and 2 in the previous setting section. Every time you push the [+] button,
the program number changes (01 02 03 ...) and you can confirm each setting.
After confirming the settings, push the [SETTING START/END] button to get out of setting
mode. Make sure "date" and "time" are indicated on the display and the colon is flashing.
Then replace the cover and lock.
Changing the Weekly Program
Refer to the Step 1 and 2 in the previous setting section and select the program number,
which you want to change settings. Once the desired program number starts flashing, push
the [SET] button and change settings in the same manner as you originally set.
Deleting the Weekly Program
Refer to the Step 1 and 2 in the previous setting section and select the program No., which
you want to delete settings. Once the desired program No. starts flashing, push the [SET]
button and delete the " " mark over the selected duration by pressing the [-] button. Then,
push the [SET] button. At that moment, the display will change as illustrated in the
following figure and now settings are deleted.
53
47
AM
Date
Colon
SET FUNCTION
WEEKLY
PROGRAM
FOR EXT.
SIGNAL
Push the [SETTING START/END] button to get out of setting mode. Make sure "date" and
"time" are indicated on the display and the colon is flashing. Then replace the cover and
lock.