Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 35)

AM
Colon
Date 12
11
Push the [SETTING START/END]
button to get out of setting mode.
Make sure "date" and "time" are
indicated on the display and the
colon is flashing. Then replace the
cover and lock.
35
29
Limit hours for OUT punch.
This is the time "on the clock" from the last IN punch before the clock should consider a
forgotten punch. This allows for the next punch to be treated as an IN punch.
Set the " 19 Limit hours for the OUT punch".
Finally, push the [SET] button again
to set the left-side number at "19"
by pressing the [+] button. Once
you push the [SET] button, flashing
of the display will change to
"Hour". In case of the example,
push the [+] or [-] button to set at
"18" and push the [SET] button. At
that moment, the display will
change from flashing to steady.
Range of values: 1-48 hour(s)
(" " makes the function disabled.)
SET FUNCTION
Program No.
SCHEDULE
SET FUNCTION
SCHEDULE
SET FUNCTION
SCHEDULE
Hour