Round and grace time for start/end time (st/et), Round and grace time for start / end time (st/ et) – Acroprint ES1000 Totalizing Payroll Recorder User Manual

Page 48

Advertising
background image

Round and Grace Time for Start / End Time (ST/ ET)

Push the [SETTING START/END] button before you start setting. At that moment,
" " is indicated on a display and you go into setting mode.

Set the " 06 Duration of round time (start & end shift times)".

1

Push the [FUNCTION] button for 2
seconds.

2

Once a number on the display starts
flashing, position the " " mark next
to the "SCHEDULE" mark by
pressing the [FUNCTION] button.


A flashing number can be changed.

3

Push the [+] or [-] button to set the
left-side number at "06" and push
the [SET] button. At that moment,
flashing of the display will change
to the middle numbers which
indicate round-forward period
(min.) for IN punch before the start
time. In case of the example, push
the [+] or [-] button to set at "15"
and push the [SET] button. At that
moment, flashing of the display will
change to the right-side numbers.

Range of values: 1-99 min.
(" "makes the function disabled.)

48

42

SET

FUNCTION

Program No.

SCHEDULE

SET

FUNCTION

SCHEDULE

06 Duration of
round time
for ST

07 Duration of
grace time
for ST

Round forward
time zone

Start time

(ST)

Grace back
time zone

15

min.

5

min.

06 Duration of
round time
for ET

07 Duration of
grace time
for ET

Grace forward
time zone

End time

(ET)

Round back
time zone

20

min.

30

min.

Round time

for ST

SET

FUNCTION

SCHEDULE

Round time

for ET

Advertising