Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 52)

6
Push the [+] or [-] button to set
"00". Then, push the [SET] button.
8
Push the [SETTING START/END]
button to get out of setting mode.
Make sure "date" and "time" are
indicated on the display and the
colon is flashing. Then replace the
cover and lock.
5
In case of the example, push the [+]
or [-] button to set "9" and push the
[SET] button. At that moment,
flashing of the display will change
from "Hour" to "Minute".
7
Set the program No. 2.
Push the [SET] button again and the
"Program No." starts flashing. Push
the [+] button to set at "02", and
then, push the [SET] button.
Make settings for the Program No. 2
in the same manner as for the
Program No. 1, as illustrated in the
figure on the left, and push the
[SET] button to finish the setting.
At that moment, the display will
change from flashing to steady, and
the setting is now completed.
52
46
AM
Date
Colon
SET FUNCTION
2 3 5 7
SU MO TU WE TH FR SA
SET FUNCTION
2 3 5 7
SU MO TU WE TH FR SA
AM
AM
SET FUNCTION
2 3 5 7
SU MO TU WE TH FR SA
SET FUNCTION
2 3 5 7
SU MO TU WE TH FR SA
PM
WEEKLY
PROGRAM
FOR EXT.
SIGNAL
WEEKLY
PROGRAM
FOR EXT.
SIGNAL
WEEKLY
PROGRAM
FOR EXT.
SIGNAL
WEEKLY
PROGRAM
FOR EXT.
SIGNAL