Acroprint ES1000 Totalizing Payroll Recorder - Manual (Page 55)

2
Once a number on the display starts
flashing, position the " " mark next
to the "DAYLIGHT SAVING TIME"
mark by pressing the [FUNCTION]
button.
A flashing number can be changed.
1
Push the [FUNCTION] button for 2 seconds.
Set the "starting date".
3
In case of the example, push the [+]
or [-] button to set at "05" and push
the [SET] button. At that moment,
flashing of the display will change
from "Year" to "Month".
4
Push the [+] or [-] button to set at
"4" and push the [SET] button. At
that moment, flashing of the display
will change from "Month" to
"Date".
5
Push the [+] or [-] button to set at
"3" and push the [SET] button. At
that moment, "starting date" on the
display will change from flashing to
steady and the " " mark is displayed
under "SU". Wait a few seconds,
then go on to the Step 6.
Month Date Year " " mark means
"starting date" setting.
Month
Month
Date
SU
SU
55
Date
49
Push the [SETTING START/END] button before you start setting. At that moment,
" " is indicated on a display and you go into setting mode.
SET FUNCTION
SET FUNCTION
SET FUNCTION
SET FUNCTION
SET FUNCTION
SET FUNCTION
SET FUNCTION
DAYLIGHT
SAVING
TIME
DAYLIGHT
SAVING
TIME
DAYLIGHT
SAVING
TIME
DAYLIGHT
SAVING
TIME
DAYLIGHT
SAVING
TIME
DAYLIGHT
SAVING
TIME
DAYLIGHT
SAVING
TIME