Recorder settings, User interface, Loop recording – EVS XS Version 11.02 - July 2013 Configuration Manual User Manual
Page 104
Recorder Settings
User Interface
The Recorder settings allow specifying configuration settings associated to the record
channels.
These fields are available in the following interfaces:
•
in the Multicam Configuration window, Channels tab, in the advanced display mode:
◦
on page 5, 6 or 7 on the server-based application
◦
on page 1 on the web-based interface
•
in the Technical menu of the Remote Control Panel (T2.X)
The following screenshot highlights the Recorder settings, defined on page 7 of the
Channels tab in the server-based application:
Loop Recording
Description
Enables/disables the endless loop recording of all record
channels of the EVS server.
Values
Yes (default) / No
The value is forced to 'Yes' in all configurations, except
Spotbox and Server configurations.
96
3. Multicam Configuration
EVS Broadcast Equipment S.A.
Issue 11.02.A July 2013