EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 178)

Automake clip for CAM A/B/C/D/E
Availability This parameter is only displayed in XSense configurations.
Introduction When creating clips, the clip corresponding to the camera on
which IN/OUT points have been marked are always saved. It
is possible to save automatically the same action on the other
cameras.
Only cameras letters applicable to the logical channels are
displayed.
Description Specifies that clips have to be created on the given camera (A,
B, C, D or E) even if no IN or OUT point has been marked on
that camera.
Values Yes / No
Default value Yes
Make clip rem. trains
Availability This setting is only available if the license code 117 is valid.
Description Allows users to clip all cameras of a remote EVS server if at
least one record train of that server is controlled.
Values Ctrled Cams / All cams
Default value Ctrled Cams
Guardbands
Description Specifies the amount of A/V material that remains available
before and after a clip (called 'guardbands') when the clip is
created.
Values From 00s00fr to 60s00fr
Default Value 05s00fr
170 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013